Single arm computer WDW-5
Brief introduction：This series of tension tester is suitable for testing the mechanical prope
1. Equipment parameters and configuration
Technical parameters | To configure |
1. The maximum test force: 100N; 2. Range: 0N-100N; 3. The accuracy of the test force is better than that of 1%. 4. Displacement resolution: 0.001mm; 5. The accuracy of displacement measurement is better than 1%. 6, stretching stroke: 600mm or 1000mm (optional); 7, compression stroke: 600mm or 1000mm (optional); 8. Test travel: 600mm or 1000mm (optional); 9. The range of displacement speed control: 0.1 ~ 500mm/min 10. The precision of the displacement speed control is better than that of 1%. 11. Test machine level: superior to level 1 12. The size of the test machine: 480*280*1480 or 1750 mm 13, appearance: meet the requirements of GB/T2611 14, complete set: meet the standard requirements 15. Protection function: the tester has overload and limit protection function. 16. Power supply: 220V, 50Hz 17, weight: 150KG | 1. high strength main engine (one arm column type structure). 2. high precision photoelectric encoder 3. AC stepper servo speed control system and frequency division motor. 4. Taiwan precision screw pair A set of 5. precision circular arc synchronous deceleration system 6. high precision load sensor A set of 7. special tensile test accessories A set of 8. compressing accessories Special measurement and control system for 9. HX test machine 10. brand commercial computer 11. HP brand color printer 12. HXTEST multifunction measurement and control software 13. optional dual display dual control system |
Two. Main uses:
This series of tension tester is suitable for testing the mechanical properties of various metal, non metal and composite materials such as rubber, plastic, textile, waterproof material, wire, cable, wire rope, wire, wire, metal bar, metal plate, hardware, rubber and plastic, footwear, leather, garment, textile, insulator, terminal and so on. Stretch, tear, peel, compression, bending, shear resistance, three point bending and other physical properties test. The machine has the test force digital display, the test speed is continuously adjustable, the sample is broken automatically, the peak hold and so on. The test results fully meet the requirements of the relevant national standards.
Three. Function and characteristics:
The design of WDW series microcomputer controlled universal testing machine converge the control technology and shape design of advanced test equipment. This machine has beautiful appearance, convenient operation, no pollution, low noise, stable and reliable performance, and has a wide range of speed regulation. The machine adopts alternating frequency stepping motor and AC digital servo speed control system as the driving device. After the circular arc synchronous belt and the circular arc synchronous pulley deceleration system decelerate, the precision ball screw pair is loaded, and a variety of mechanical properties test of the sample is completed.
Four, after sale quality service
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three package period is one year from the date of formal delivery. During the three package period, the supplier will provide free repair service for all kinds of malfunctions of the equipment and make timely and free replacement of damage caused by non-human parts. During the operation of the warranty, the supplier will promptly serve the ordering party and assist the ordering party to complete the maintenance task.
