MRS-10G digital display lever four ball friction and wear testing machine thumbnail
Brief introduction:MRS-10G lever four ball friction tester is a highly cost-effective laborat
First, product introduction:
MRS-10G lever four ball friction tester is a highly cost-effective laboratory evaluation equipment developed by our company to meet the needs of lubricants R & D and production. The test machine uses sliding friction to evaluate the bearing capacity of lubricants under high point contact pressure, including the maximum non bite load PB. Three indexes, such as load PD, integrated wear value ZMZ, etc.
Determination of the bearing capacity of GB 3142-82 lubricants
Determination of the extreme pressure properties of GB/T 12583-98 lubricants
Determination of wear resistance of SH/T 0189-92 lubricating oil
Determination of the extreme pressure properties of SH/T 0202-92 grease
Determination of wear resistance of SH/T 0204-92 grease
Two. The main technical parameters:
Serial number | entry name | Technical indicators |
1 | Test force | |
1.1 | Maximum test force | 10000N |
1.2 | Below 4% of maximum test force, indication error | ±5N |
1.3 | More than 4% of the maximum test force and relative error of the indication | ±1% |
1.4 | Loading mode of test force | Weight manual loading |
2 | Friction | |
2.1 | Maximum friction | 200N |
2.2 | The relative error of the frictional force should not be greater than the relative error. | ±3% |
2.3 | Automatic parking with heavy load and friction | |
3 | Test machine heating system | |
3.1 | Heater operating temperature range | room temperature~250℃ |
3.2 | Temperature control precision | ±3℃ |
4 | Spindle speed | |
4.1 | Spindle speed range | 300~1800r/min (stepless adjustable) |
4.2 | Speed control precision | less than 15r/min |
5 | The amount of oil used for one test | 10ml |
6 | Nominal diameter of standard steel ball | φ12.7 |
7 | Spindle motor power | 1.5kW |
8 | Spindle control of test machine | |
8.1 | time control | Auto parking more than set time |
8.2 | Friction control | Automatic parking exceeding the set of friction |
9 | Time display and control range of test machine | 1s~9999min |
10 | The size of the test machine (long x width * high) | 1300×490×1220(mm) |
11 | Main accessories: grinding spot measuring solid microscope | |
11.1 | Magnification of measuring microscope | 25× 100× |
11.2 | Measurement range of grinding spot | 0~10mm |
11.3 | Accuracy of measurement range of grinding spot | 0.01mm |
Tel:+86-0531-85860713,+8615508660930
WeChat/WhatsApp:+8615508660930
Skype:+8615589966455
QQ:1538151698
The contact:Janna Tang
Email:cnjntest@163.com