HRT-A02 reciprocating friction and wear tester

First, product introduction:

HRT-A02 reciprocating friction and wear tester is the original WFM-02 reciprocating friction and wear tester. It is a kind of widely used microdynamic friction and wear testing machine. It is mainly used to study the friction properties of material or surface coating. The equipment has the stability and reliability of the reciprocating stroke, the wide range of adjustment and the precision of friction measurement. It has many advantages, such as high degree, variety of test form and so on. The main friction pairs of the machine use the standard ball friction and the configuration of the pin and disc friction. It can be used to choose various kinds of friction pairs, such as the reciprocating, rotating and ring friction pairs of the ball disc. The main engine of the test machine is controlled by computer. The software of the special friction and wear testing machine based on high speed industrial control can be used to draw the curve of each parameter in real time. The frequency of the point acquisition can be as high as 1000HZ, so that the dynamic and effective detection of the process can be effectively realized, and the measurement precision of the friction force and the test force can be improved. The software is equipped with parameter super preset shutdown or alarm protection. The design of the instrument is exquisite, convenient to install and debug, the software interface is clear and humane, and the operation is convenient.

Two. Reference appearance:

Three. The main technical specifications:

1, reciprocating frequency: 1-10/20/30/50/100/200Hz (select module according to specific requirements)

2, reciprocating stroke: 1-40mm continuously adjustable / fixed adjustable stroke /

10um-2mm electromagnetic type (select module according to specific requirements)

3, maximum load: 100/200N

4, loading mode: weight loading / automatic loading (select module according to specific requirements)

5. Relative error of test force: + 1%

6. The range of friction measurement: 0-100N + 1N

7. Online grinding measurement module: magnetoelectric induction measurement (select module according to specific requirements).

8. The resolution of wear measurement: 0.001mm

9, rotary module: maximum speed 2000r/min + 1 (select module according to specific requirements)

10. Test temperature: heating module /120 at room temperature (select module according to specific requirements)

11. Temperature measurement: thermocouple

12. The precision of temperature measurement: + 2 C

13. Mode mark observation: HD electronic observation system shows the shape and size of wear marks.

14. Data processing: a set of computer processing systems.

Note: due to the specificity of friction and wear equipment is relatively strong, the above parameters are for reference only.

Four. The main configuration:

1. The main engine of the test machine is 1.

2, 1 sets of reciprocating and rotating modules;

3, the test force and the friction force sensor each 1 sets;

3. 1 sets of friction pairs;

4, 1 sets of special control systems; (including high computer, acquisition module and transfer parts).

5, 1 sets of special tools; (including calibration weights and assistive devices)

Five. Confidentiality of technical information and information

1. This technical scheme belongs to the technical information of our company. The information is not allowed to be transmitted to the third party without permission. The user shall bear the obligation to confidentiality of the technical information and information provided by us. No matter whether this scheme is adopted or not, the provisions are valid for a long time.

2, we should also undertake confidentiality obligations for the technical information and information provided by users.

Tel:+86-0531-85860713，+8615508660930

WeChat/WhatsApp：+8615508660930

Skype:+8615589966455

QQ：1538151698

The contact：Janna Tang

Email:cnjntest@163.com