WE-100B liquid crystal digital display hydraulic universal testing machine
Brief introduction：The WE series digital display hydraulic universal testing machine is mainl
1. Equipment parameters and configuration
Technical parameters | To configure |
1. the maximum test force: 100kN; 2. grade of test machine: Grade 1; 3. the test force is divided into two parts: the whole process is not divided into four equivalent files. 4. the effective measurement range of test force: 2% ~ 100%FS; 5. the accuracy of test force is better than that of indication value by 1%. 6. cylinder stroke: 250mm; 7. the maximum distance between the tensile jaws: 650mm; 8. the maximum distance between the compressed surfaces: 550mm; 9. column spacing: 540mm; The diameter of the 10. round specimen is: 6 ~ 26mm; The maximum clamping width of 11. flat specimens: 75mm; 12. flat specimen holding thickness: 0 ~ 15mm; 13. up and down plate size: 160mm; 14. the distance between bending roller: 30 ~ 600mm; 15. the width of the bending roll: 140mm; 16. bending roll diameter: diameter 30mm (marking); The maximum moving speed of the 17. piston: 70mm / min; 18. the adjustment speed of the lower beam: 120mm / min; 19. mainframe size: 810 x 560 x 2050mm; 20. the size of the oil source control cabinet is 580 x 550 x 1280mm; 21. power supply: 380V + 10%/50Hz; 22. equipment power: oil pump motor power 1.5kW; The power of the motor is 0.55kW on the top and bottom of the beam. 23. host weight: 1500kg; 24. oil source control cabinet weight: 320kg.
| 1.100KN double column, double screw cylinder and lower cylinder. 2. oil source control cabinet set: 3. oil pump adopts high performance and low noise plunger pump. The 4. motor adopts the "South Anhui" motor. 5. other main components are "dawn hydraulic"; The shell of 6. oil source control cabinet is treated with full spray. 7. high precision pressure sensor; 8. auxiliary equipment configuration of test machine; 9. hydraulic automatic fixture set; 10. drawing accessories with one set: 11. round specimen jaw: 6 to 13mm, and 13 to 26mm. 12. flat specimen fixture: 0 ~ 15mm one payment; 13. a set of compressing accessories: 14. upper and lower pressure plate size: 160mm or 204 x 204mm (matching); A set of 15. three point bending accessories: 16. the distance between bending roller: 30 ~ 600mm; 17. the width of the bending roll: 140mm; 18. bending roll up and down diameter: 3 * 30MM (standard); 19.HXT set of high performance digital display test system for human-machine dialogue tester. 20. micro printer one. Two. Main uses: |
Two. Main uses:
The WE series digital display hydraulic universal testing machine is mainly used for tensile tests, compression and bending tests of metallic materials. The concrete, brick, tile, rubber and their products can be tested after adding the corresponding accessories.
The machine is composed of a dual column, double screw oil cylinder, a lower main engine and an oil source control cabinet. The drawing space is above the main engine, and the compression and bending test space is located between the main beam and the work table. The adjustment of the test space is realized through the movement of the middle beam, and the middle beam is lifted by chain drive.
The test process of this machine adopts hydraulic manual loading, sensor force measurement, digital display screen real-time display, automatic storage and printing function. After the completion of the test, the maximum force, tensile strength and yield strength of the material are automatically obtained.
Three. Function and characteristics:
The special super thick pincer seat makes the jaw fully contained in the seat of the jaw when holding the sample with the jaw, so that the clamp is more reliable, and the possibility of the deformation and damage of the horn shape is eliminated, and the service life of the equipment is greatly improved.
The wear-resistant lining plate is added between the jaw seat and the clamp plate, and the phenomenon that the oxide skin falls into the scrap of the slant surface of the jaw seat is eliminated during the metal stretching process, making the clamping process more slippery and more firmly clamped. The machine has stable balance, low noise, high efficiency and wide speed range.
Four, after sale quality service
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three package period is one year from the date of formal delivery. During the three package period, the supplier will provide free repair service for all kinds of malfunctions of the equipment and make timely and free replacement of damage caused by non-human parts. During the operation of the warranty, the supplier will promptly serve the ordering party and assist the ordering party to complete the maintenance task.
