WAW-100B type microcomputer controlled hydraulic universal testing machine

First, brief introduction

The main engine of the WAW-100B microcomputer controlled electro-hydraulic servo universal testing machine adopts the main engine of the cylinder under the oil cylinder, which is mainly used for the tensile, compression and bending tests of metal and non-metal. It is suitable for metallurgy, construction, light industry, aviation, aerospace, materials, tertiary institutions, scientific research units and other fields. The test operation and data processing conform to the requirements of GB228-2002 "tensile test method for room temperature material metals".

Two. Main performance technical indicators

1. The maximum test force: 100kN;

2. The range of test force measurement: 1KN-100kN;

3. The accuracy of the test force shows: 1%;

4. Displacement measurement resolution: 0.01mm;

5. Deformation measurement: standard spacing 50mm, maximum deformation 10mm.

6. The precision of deformation measurement: + 0.5%

7, constant force, constant deformation, constant displacement control range: 0.4%~100%FS

8, constant force, constant deformation and constant displacement control precision:

When the value is set to <10%FS, the set value is within 1%

When the set value is more than 10%FS, the set value is within 0.5%

9, control precision of deformation rate: when the rate is <0.05%FS, it is set at + 2%.

When the rate is more than 0.05%FS, it is within the set value of 0.5%

10, the maximum moving speed of the piston: 100mm/min;

11. Maximum tensile test space: 650mm (including piston stroke)

12, maximum compression space: 550mm (including piston stroke)

13. The thickness of the flat specimen: 0-15mm

14, round specimen holding diameter: [Phi] 6- [Phi] 26mm

15. Pressure plate size: Phi 204 mm

16, bending test and roll distance: 350 mm

17. Roll width: 140mm

18. The diameter of the fulcrum: 30mm

19, the piston stroke: 200mm;

20, clamping mode: hydraulic clamping

21, sensor and amplifier: oil pressure sensor, inserted in PC machine programmable amplifier, automatic zero adjustment, calibration

22. Shape size:

Host: 900 x 600 x 2050mm

Oil source: 1400 x 700 x 850mm

23, the whole machine weight: 2700 kg

Three. System configuration

3.1 host oil cylinder underlay host 1 Units

3.2 sensor 1

3.3 servo control oil pump 1 sets

3.4 electro-hydraulic servo valve 1

3.5 special control system of servo control system 1 sets

3.6 electrical control system 1 sets

3.7 extensometer Beijing iron and Steel Research Institute produces 1

3.8 photoelectric encoder 1

3.9 computer associative brand computer 1

3.10 printer HP color inkjet printer 1

3.11 standard attachments

Round sample tensile jaw mm 6- 6- 13, 13- 13-

Flat specimen tensile jaw mm0-151 sleeve

Compression attached mm 1601 sets

Bending attachment mm test 4501 maximum distance between two pivot points

3.12 1 sets of random tools

Four. The description of the scheme

1. Host

The main engine adopts the cylinder under the main engine, and the drawing space is above the main engine. The compression, bending and shearing test space is located between the lower beam and the worktable of the main engine. The structure is shown as shown in Figure 1.

2. Transmission system

The lower beam is driven by motor, cycloidal pin wheel reducer, sprocket and nut screw drive to realize the adjustment of drawing and compression space.

3. The hydraulic system (the source of the lute type oil)

3.1 hydraulic principle

As shown in Fig. two, it is a load adaptive throttle governing system.

The hydraulic oil in the tank goes through the motor to drive the high pressure gear pump into the oil road. It flows through the one-way valve, the high pressure 10 mu oil filter, the pressure difference valve group and the servo valve, and enters the oil cylinder. The computer sends out the control signal to the servo valve, controls the opening and direction of the servo valve, so as to control the flow of the oil cylinder and realize the control of the constant speed of test, the constant speed displacement and so on.

3.2 characteristics: 1) the imported high pressure gear pump has low noise and stable pressure.

2) integrated design of power system and operation table, which is easy to operate and saves experimental space.

3) the surface is treated with plastic spray, and the appearance is beautiful.

Five. Control system

The STC300 digital closed loop measurement and control system has many advanced features and technological innovations, which are mainly reflected in:

1. Four closed loop control of test force, specimen deformation, piston displacement and test process are realized.

2, the data acquisition system is composed of 4 high precision 24 bit A/D conversion channels. The maximum resolution is 1/300000, and the whole process is not divided.

3, select BB, AD, Xilinx and other original brand integrated devices, all digital design;

4, conform to the PCI bus standard, microcomputer automatic identification and installation, so that "plug and play".

5, electronic measuring system without potentiometers and other analog components, to ensure interchangeability, convenient maintenance and replacement.

Six. Control software

Comply with GB228-87, GB228-2002 and other more than 30 national standards.

1, the computer control system has the advantages of high integration, stable performance and convenient adjustment. The experimental data can be collected in real time, and the experimental data can be displayed in real time. The test data file can be saved in the way of Access common database or SQLserve large database. It is convenient to realize the customer's resource sharing and network management, as well as the reanalysis of the user. For various user defined Word2000 reports, the software can easily be accessed and solve the difficult problems that different users or the same user have different needs on the test reports at different times. The software can deal with the original data of test force, displacement and time and the curves derived therefrom.

2, protection function: the machine has two kinds of limit protection mode of software and machine, the proportion of the automatic shutdown over the maximum load can be set dynamically; it has many kinds of protection functions, such as overcurrent, overvoltage, overload and so on.

3. Automatic marking for load channels is intuitive and convenient.

4. Batch test can achieve hierarchical display of curves and automatically follow curves.

5, the software can realize user defined speed setting and speed computer adjustment. It can also achieve high precision speed calibration, adjust the speed gear and coding at any time.

6, monitoring test process: the test force, displacement, curve and other parameters can be displayed in real time.

7, software authority classification management function: in order to improve the security of software and data, the software can be set by different password protection to realize the function of sub authority management.

8. Result reappearance function: after the test operation is completed and saved, it can be opened at any time in the future and reanalyzed the test data according to user needs.

9, the load time, load to displacement, displacement and time can be selected according to the needs of the user, and the test and data display, storage, analysis and printing can be carried out.

10, curve point by point traversal function: you can click the force and deformation values on the curve to get all parameters of each point.

11, the result contrast function: can observe several test curves at the same time, and can realize the comparison of the characteristic of the sample to be analyzed by the superposition of multiple curves and local magnification.

12. Force interface: force channel interface and test software can be equipped with various sensors according to user needs, and can calibrate, modify parameters and normal tests.

13, data sampling frequency: high speed sampling frequency can be selected according to user test requirements.

Seven. Confidentiality of technical information and information

1. This technical scheme belongs to the technical information of our company. The user shall bear the obligation to confidentiality of the technical information and information provided by us. No matter whether this scheme is adopted or not, the terms are valid for a long time.

2, we should also undertake confidentiality obligations for the technical information and information provided by users.

Eight. After sale service

The quality guarantee period is one year from the acceptance, lifelong maintenance, free service within one year, free installation and commissioning of new machines, free training operators.

1, the test equipment provided is in line with the current national standard or industry standard, so as to ensure the advanced technology and reliability of the test equipment.

2. The necessary spare parts and accessories are supplied perennial.

3, product perennial technical support, product maintenance and repair within 24 hours to provide solutions, if you can not solve the problem, send someone to the scene to solve.

4, the software is upgraded free of charge in life.

Ji'nan Heng Xu Test Machine Technology Co., Ltd.

Contact phone: 0531-85860723

Fax: 0531-85860713

Cell phone: 15508660930